Shower kit - Chrome

This shower kit is the ultimate solution for a stylish and well-organized shower. The set includes one elegant trippel soap pump holder, which are easily and conveniently mounted using 3M tape that comes pre-applied to the product. This means you won't need to drill any holes in your wall, making the installation both quick and simple. The soap pump holder come with three brown soap pumps featuring a modern and sleek design. The pump heads are easy to use and provide an even dispensing of the contents. With this set, you get not only a practical storage solution for your shower but also an aesthetically pleasing design that is easy to install and maintain.

Installation Instructions:

1. Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.
2. Remove the protective film.
3. Apply the product by pressing it against the substrate for 10 seconds.
4. For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.

Cleaning: Use a clean, damp cloth when cleaning the product.

NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.